| The uniqueness of Veneers |  | Please note that the veneer sheet that will be produced may not necessarily reflect the same design as the sample below, each veneer sheets are unique.
There are many factors that bring the uniqueness in each veneer sheets, such as: the tree it comes from, then the part from which it was cut, the type of cut applied to extract the veneer (flat, quarter, rift cuts or rotary peeling) and finally the matching type for the veneer, i.e. the way the pieces have been assembled together.
|
| Material Conditioning | | Before taking the steps to glue the wood veener to the substrate, it is essential to condition the material together. This may be assomplished by alternating in a pile the substrate panels and the venner sheets or cut peices. This will permit different materials to arrive to the same temperature and the same humidity levels. |
