Real Wood Thick Edgebanding

The uniqueness of Edgebanding		Please note that the edgebanding strips or rolls that will be produced may not necessarily reflect the same design as the sample below, each edgebanding strip or roll is unique. There are many factors that contribute to the uniqueness of each edgebanding: the tree it comes from, the part from which it was cut, the type of cut applied to extract the edge (flat, quarter, rift cuts or rotary peeling) and finally the matching type for the edge, i.e. the way the pieces have been assembled.
Material Conditioning		Before taking steps to glue the wood veener or edgebanding to the substrate, it is essential to condition the materials. This may be accomplished by alternating in a pile the substrate panels and the edgebanding. This will permit different materials to arrive at the same temperature and the same humidity levels.